rasppberry pi / скрипт установки драйвера TP-Link TL-WN725N

ссылки:

http://tech.enekochan.com/en/2014/03/08/new-script-to-compile-tp-link-tl-wn725n-version-2-lwfinger-driver-in-raspbian/

1	http://tech.enekochan.com/en/2014/03/08/new-script-to-compile-tp-link-tl-wn725n-version-2-lwfinger-driver-in-raspbian/

установка драйвера:

#!/bin/bash
# Get linux source code, prepare config files and create symlinks
VERSION=<code>uname -r | awk -F'.' '{print $1"."$2}'
cd ~
wget https://codeload.github.com/raspberrypi/linux/tar.gz/rpi-${VERSION}.y -O rpi-${VERSION}.y.tar.gz
sudo tar zxf rpi-${VERSION}.y.tar.gz -C /usr/src/
cd /usr/src/linux-rpi-${VERSION}.y/
sudo bash -c "zcat /proc/config.gz > /usr/src/linux-rpi-${VERSION}.y/.config"
# In the next step you may be prompted questions about the configuration
# if your /proc/config.gz does not answer them (new features for example)
sudo make oldconfig
sudo make modules_prepare
sudo wget https://github.com/raspberrypi/firmware/raw/master/extra/Module.symvers
sudo ln -s /usr/src/linux-rpi-${VERSION}.y /lib/modules/<code>uname -r</code>/source
sudo ln -s /usr/src/linux-rpi-${VERSION}.y /lib/modules/<code>uname -r</code>/build
# Optional
#sudo ln -s /usr/src/linux-rpi-${VERSION}.y /usr/src/linux-<code>uname -r
#sudo ln -s /usr/src/linux-rpi-${VERSION}.y /usr/src/linux

# Get driver source, compile, install and load it
cd ~
git clone https://github.com/lwfinger/rtl8188eu.git
cd rtl8188eu
# This wil take around 20 minutes
make all
sudo make install
# After this step you should have those new files installed:
# /lib/modules/<code>uname -r</code>/kernel/drivers/net/wireless/8188eu.ko
# /lib/firmware/rtlwifi/rtl8188eufw.bin
sudo modprobe 8188eu

# Remove driver and linux source code to recover some space (around 700MB)
# Leave those lines commented if you want to keep the code for future compilations
#sudo rm /lib/modules/<code>uname -r</code>/source
#sudo rm /lib/modules/<code>uname -r</code>/build
#sudo rm /usr/src/linux-<code>uname -r
#sudo rm /usr/src/linux
#sudo rm -R /usr/src/linux-rpi-${VERSION}.y
#cd ~
#rm rpi-${VERSION}.y.tar.gz
#rm -R rtl8188eu

#!/bin/bash

# Get linux source code, prepare config files and create symlinks

VERSION=<code>uname -r | awk -F'.' '{print $1"."$2}'

cd ~

wget https://codeload.github.com/raspberrypi/linux/tar.gz/rpi-${VERSION}.y -O rpi-${VERSION}.y.tar.gz

sudo tar zxf rpi-${VERSION}.y.tar.gz -C /usr/src/

cd /usr/src/linux-rpi-${VERSION}.y/

sudo bash -c "zcat /proc/config.gz > /usr/src/linux-rpi-${VERSION}.y/.config"

# In the next step you may be prompted questions about the configuration

# if your /proc/config.gz does not answer them (new features for example)

sudo make oldconfig

sudo make modules_prepare

sudo wget https://github.com/raspberrypi/firmware/raw/master/extra/Module.symvers

sudo ln -s /usr/src/linux-rpi-${VERSION}.y /lib/modules/<code>uname -r</code>/source

sudo ln -s /usr/src/linux-rpi-${VERSION}.y /lib/modules/<code>uname -r</code>/build

# Optional

#sudo ln -s /usr/src/linux-rpi-${VERSION}.y /usr/src/linux-<code>uname -r

#sudo ln -s /usr/src/linux-rpi-${VERSION}.y /usr/src/linux

# Get driver source, compile, install and load it

cd ~

git clone https://github.com/lwfinger/rtl8188eu.git

cd rtl8188eu

# This wil take around 20 minutes

make all

sudo make install

# After this step you should have those new files installed:

# /lib/modules/<code>uname -r</code>/kernel/drivers/net/wireless/8188eu.ko

# /lib/firmware/rtlwifi/rtl8188eufw.bin

sudo modprobe 8188eu

# Remove driver and linux source code to recover some space (around 700MB)

# Leave those lines commented if you want to keep the code for future compilations

#sudo rm /lib/modules/<code>uname -r</code>/source

#sudo rm /lib/modules/<code>uname -r</code>/build

#sudo rm /usr/src/linux-<code>uname -r

#sudo rm /usr/src/linux

#sudo rm -R /usr/src/linux-rpi-${VERSION}.y

#cd ~

#rm rpi-${VERSION}.y.tar.gz

#rm -R rtl8188eu